Mold remediation referrals for Nashville & nearby townsCall: (615) 813-4805
(615) 813-4805

Mold in Walls & Drywall in Fairview, TN

moldremediationnashvilletn.net

Stop the leak, dry what you can, and have the moldy drywall and insulation removed before the wall is rebuilt.

Blistered paint or a musty closet in your Fairview home?
Call now to be connected with a local mold remediation company in Fairview.
(615) 813-4805

In Fairview, mold inside a wall usually comes from a hidden plumbing leak, rain working in around windows and siding, or flood water like the May 2010 storm that dropped about 16.9 inches of rain on the city. Handling it means stopping the water, cutting out moldy drywall and insulation, and drying the framing before rebuilding. Call the number on this page to be connected with a local mold remediation company in Fairview.

Inspection hole cut into drywall revealing mold inside the wall, mold in walls & drywall in Fairview, TN

Wall mold in Fairview

Fairview is a Williamson County city about 23 miles from Nashville. In the May 2010 flood, about 16.9 inches of rain fell here in two days, the highest total among the Williamson County towns in a Williamson Herald look back at the flood. Most wall mold, though, starts with ordinary leaks and Middle Tennessee humidity rather than floods.

What to do now

  1. Find and stop the water. Check the fixtures on the other side of the wall, the window above it and the gutters outside.
  2. Dry what you can. EPA advises drying wet materials within 24 to 48 hours; run a dehumidifier and keep indoor humidity under 60 percent.
  3. Keep sensitive people out. EPA says people with asthma or weakened immune systems should stay away from moldy areas.
  4. Skip the bleach and paint. Painting or caulking over mold hides it without fixing it.
  5. Measure before anyone cuts. A moisture meter shows how far the wet area runs, which sets the cut line.
  6. Renters: put it in writing. If the landlord doesn't fix the leak, the City of Fairview Planning & Codes Department enforces health and safety code ordinances and takes reports through its Report Concern form.
Call now to be connected with a local mold remediation company in Fairview.
(615) 813-4805
Bubbling paint and stains on an interior wall, mold in walls & drywall in Fairview, TN

Signs and what they usually mean

SignUsual source
Wavy or blistered paint near the floorWater wicking up from a leak or past flooding
Stain spreading down from a ceiling cornerRoof, flashing or upstairs plumbing leak
Musty odor in a closet on an outside wallCondensation in still air against a cool wall
Spotting around a window frameFailed caulk or flashing letting rain in
Soft drywall beside a tubLeaking grout, caulk or shower valve

Cost factors

Angi reports a national range of about $1,000 to $20,000 for mold in walls, and Middle Tennessee prices vary. Square footage, wet insulation, containment, access behind cabinets or tile, and whether rebuild is included all move the number. Jobs of $25,000 or more need a Tennessee contractor's license, and mold remediation is the S-F classification. If framing must be replaced, the City of Fairview Planning & Codes Department issues building permits. The Williamson County Health Department has a Fairview office on Fairview Boulevard for health questions.

Mold in Walls & Drywall questions in Fairview

How much of the wall will be cut out?
Companies usually cut past the visible growth until they reach drywall that is dry and clean, using moisture readings to set the line. After flooding, a straight cut a set height above the water line is common. Ask to see the planned cut line before work starts.
How can there be mold inside a wall when I can't see any?
Water from a leak or condensation can soak the back of the drywall, the insulation and the studs long before anything shows on the painted face. A musty smell, bubbling paint or a soft spot is often the first clue.
How do I keep mold from coming back once the wall is rebuilt?
Fix the water source first and make sure the framing is dry before the wall is closed. After that, keep indoor humidity below 60 percent, use bath and kitchen fans, keep caulk and grout in good shape, and look under sinks and around windows after heavy rain.
Is mold inside the walls a health concern?
EPA says mold can irritate the eyes, skin, nose, throat and lungs, and people with asthma or weakened immune systems should stay away from moldy areas. If you have health concerns, talk with a health professional.

More mold services in Fairview

Mold Removal & Remediation in FairviewMold Inspection in FairviewMold & Mildew Removal in FairviewAttic Mold Removal in FairviewPost-Remediation Clearance Testing in FairviewAll mold services in Fairview

Mold in Walls & Drywall nearby

Mold in Walls & Drywall in FranklinMold in Walls & Drywall in Kingston SpringsMold in Walls & Drywall in PegramMold in Walls & Drywall in Thompson's StationMold in Walls & Drywall in Spring HillMold in Walls & Drywall in Nashville

Helpful guides

Call now to be connected with a local mold remediation company in Fairview.
(615) 813-4805

Sources

Last updated:

☎ Call (615) 813-4805